
Rotary harrow or reverse tiller: which suits your tractor?
The short answer
A rotary harrow and a reverse tiller both loosen and refine the top layer of the soil, but they do it in different ways. A rotary harrow has rotors that spin horizontally, crumbling and levelling the top layer without turning the soil over. A reverse tiller has a rotor on a horizontal shaft that turns against the direction of travel, works the soil deeply and places stones and coarse clods at the bottom.
In short: choose a rotary harrow for a level, fine seedbed on ground that has already been cultivated, and for loosening and levelling riding arenas and gravel paths. Choose a reverse tiller if you want to turn stony ground or tall grass into a seedbed in a single pass.
How does a rotary harrow work?
A rotary harrow is mounted on the three-point linkage and driven by the PTO. Under the housing are rotor heads with blades or tines that spin like tops. They crumble the top layer and level the soil, but do not bring deeper soil to the surface. A roller behind the rotors lightly firms the soil and sets the working depth.
The Knegt Rotary harrow RE125 according to the product data:
- 6 rotor heads with 2 blades each
- a crumbler roller that also acts as depth control
- an extra heavy headstock for the three-point linkage, category 1 and 2
- PTO drive with overrun clutch, the PTO shaft is supplied as standard
- weight 280 kg, required power 30 hp
Knegt describes the rotary harrow as suitable for levelling and preparing seedbeds, and also for loosening and levelling riding arenas, gravel roads and other surfaces.
How does a reverse tiller work?
A regular tiller rotates with the direction of travel. A reverse tiller rotates against it. As a result, the rotor throws the soil up against a grid of bars. Fine soil falls through the grid and ends up on top, while large clods and stones stay under the grid and end up at the bottom. This creates a fine, airy top layer in one pass.
The Knegt Reverse tiller OF145 according to the product data:
- working width 135 cm and working depth 12 cm
- fitted with a mesh roller as standard
- three-point linkage category 1 and 2
- 540 rpm PTO with overrun clutch, the PTO shaft is included
- weight 280 kg, required power 30 hp
According to Knegt, the reverse tiller is designed for tilling soil with stones and tall grass. Besides preparing the seedbed, it also aerates the soil.
Rotary harrow or reverse tiller: the differences
Both implements create a seedbed, but your starting point determines which one fits best:
- Ground that has already been ploughed, dug or cultivated: a rotary harrow crumbles and levels the top layer without bringing weed seeds up from below.
- Turning grassland or tall grass into a seedbed: a reverse tiller works through the turf and grass and buries it under the fine soil.
- Stony ground: the reverse tiller places stones and coarse clods at the bottom, while the rotary harrow largely leaves them where they are.
- Riding arenas, gravel paths and yard surfaces: the rotary harrow loosens the top layer and levels it. For keeping an arena level day to day, a leveler is often more practical.
- Soil structure: a rotary harrow works shallowly and lightly firms the soil again with its roller. A tiller works more intensively, so do not till more often or deeper than needed, and never on wet soil.
For many users the combination makes sense: first till to convert grassland or overgrown ground, then in a later season only harrow to prepare the seedbed.
Which tractor do you need?
According to the product data, both the RE125 and the OF145 require 30 hp, fit three-point linkage category 1 and 2 and weigh 280 kg. When choosing, check:
- Step 1: the power of your tractor compared with the 30 hp the implement requires.
- Step 2: the PTO speed. The reverse tiller runs at 540 rpm. PTO details per model can be found in the specifications on the models page.
- Step 3: the lift capacity. On the electric 404G2E this is 665 kg and on the 504G3E 1,100 kg, measured 61 cm behind the ball.
- Step 4: the linkage category of your tractor and the length of the PTO shaft in the highest and lowest position of the linkage.
- Step 5: traction. Four-wheel drive helps with soil cultivation, and every Knegt tractor has it as standard.
On an electric compact tractor from Knegt, the energy for the PTO comes from the battery. Soil cultivation is heavy PTO work and uses more energy than light tasks. How long you can work depends on the work intensity and your choice of battery. You can top up in between via 230V or with a fast charger, which charges the battery from 30 to 80% in about 2.5 hours.
Frequently asked questions
What is the difference between a rotary harrow and a tiller?
A rotary harrow has rotors that spin horizontally and only crumble and level the top layer. A tiller has a horizontal rotor that works and mixes the soil more deeply.
Can I maintain a riding arena with a rotary harrow?
Yes. Knegt describes the rotary harrow as suitable for loosening and levelling riding arenas and gravel roads. For daily levelling, a leveler with blades, combs and a roller is often the quicker choice.
Why does a reverse tiller turn against the direction of travel?
The opposite rotation throws the soil up against a grid of bars. Fine soil falls through and ends up on top, while stones and coarse clods stay at the bottom.
Can an electric tractor drive a tiller?
Yes. The electric Knegt 404G2E and 504G3E have a PTO with 540 and 1,000 rpm. Do check power, lift capacity and linkage category for the combination you want to use.
Advice on soil cultivation
Unsure whether to choose a rotary harrow or a reverse tiller, or want to know which combination suits your tractor and your soil? Request an advice meeting or find a Knegt dealer near you. Together we look at power, PTO, lift capacity and the work you want to do.
Would you like to see for yourself how an electric Knegt drives a soil cultivation implement? Request a free demo. For the price of a tractor or implement, simply request a quote.
















































